Furnace Repair in Highlands Ranch, CO
A furnace fault in a Colorado winter is not a next-week problem. Most furnace repairs in Highlands Ranch run $189 to $780 and take one to three hours on site. The fix starts with a real test: ignition, flame sensor, gas valve, blower, control board, and the safety switches that shut a furnace down to protect your home.
📞 Talk to an HVAC Specialist: (983) 900-5808Frequently Asked Questions — questions about furnace repair
How much does furnace repair cost in Highlands Ranch?
Most repairs run $189 to $780. Igniters and sensors land in the low hundreds. Blower motors and boards cost more. One price in writing, before work starts.
How fast can a furnace be fixed?
Most wear parts are on the truck, so most repairs end at the first visit. Plan on one to three hours on site.
My furnace runs but blows cool air. What is it?
Air with no heat points at ignition: the igniter, the flame sensor, or a safety switch that locked the burner out. All three are tested in the first visit.
Is a cracked heat exchanger a sales trick?
No. It is a carbon risk, and we show you the crack or the test that found it. The finding is logged in writing so you can get a second check.
Why does my furnace quit on the coldest nights?
At altitude, a weak igniter or a filmed sensor can pass on mild days and fail when runs get long. The test chain finds the weak part, not only the dead one.
Do you charge for the visit?
The visit and the test are part of the repair price you approve. You hear the full price before any part goes in.
What Does My HVAC Project Cost?
HVAC work is priced per job or per system — repairs by the part that failed, installs by the system and its efficiency tier. Here are the ranges we see on real jobs around Highlands Ranch, and a calculator built on the same numbers.
Furnace & AC Repair
Most repairs land $189 to $780. Wear parts — igniters, sensors, capacitors, contactors — run $189 to $400; a blower motor or control board runs $400 to $780; a heat pump repair runs $220 to $850. The diagnostic is in every range here, and you get one price in writing before work starts.
Furnace Installation
A standard 80% AFUE furnace runs $4,800 to $6,500 installed; a 96% condensing furnace runs $6,500 to $8,500, PVC vent rework included. Every install is sized by a load check and set up for 5,900 feet — permit and haul-away are in the price.
AC Installation & Replacement
A standard 14–15 SEER2 system runs $5,200 to $7,900; a high-efficiency variable-speed system runs $7,500 to $9,800. Sized to your house and your ducts by a load check — never from the old unit's label.
Heat Pump Installation
A ducted heat pump runs $7,500 to $11,000; a cold-climate dual-fuel system — pump plus your gas furnace as backup — runs $9,500 to $14,000. The change-over point is set with you, and rebate lines are shown apart from the price on the quote.
Ductless Mini-Splits
A single-zone system for one problem room runs $3,800 to $6,500; a multi-zone system for two to four rooms runs $6,500 to $12,000. No ducts to run, and each room gets its own setting.
Maintenance & Tune-Ups
A seasonal tune-up runs $129 to $189 a system: sensors, start parts, coils, drains, and gas safety checked before they fail at the worst time. A weak part found in fall costs a fraction of the same part on the coldest night of the year.
What Moves the Price
- Efficiency tier. A 96% condensing furnace or an 18+ SEER2 AC costs more up front than the standard tier — the vent rework, the second heat exchanger, and the variable-speed motor are real hardware. The written quote shows both tiers side by side.
- The $5,000 rule. Multiply the age of your system by the repair quote. If the result passes $5,000, a swap is worth a hard look. We show both prices — repair and replacement — so you can run the math yourself.
- Altitude. At 5,900 feet the air holds less oxygen. Gas pressure and combustion air are set for thin air on every install and checked on every furnace tune-up. A sea-level setup soots and locks out on cold nights.
- Duct state. Leaky or undersized ducts waste a new system's output. Ducts are checked on the site visit; sealing at the plenum is small work, a full duct run is its own line on the quote — never folded into the system price.
These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.
A note on sizing. Every install here is figured off a load check on your house — square feet, windows, ducts, and our 5,900-foot altitude — not off the old unit's label. An oversized system short-cycles; an undersized one never catches up on the coldest night. The load check is part of the site visit, before any price is set.
Estimate Your Project
Emergency calls — no heat in a cold snap, no cool in a heat wave — price off this same panel. The price is set in writing at the visit, before work starts.
Permit, haul-away, and the altitude setup are in every price. Vent rework in PVC is in the 96% tier.
New pad, line-set flush, charge by weight, and a room-by-room test are in every price.
Rebate lines are shown apart from the price on your written quote — never netted into these ranges.
One quiet wall unit per room, each with its own setting. Most single-zone jobs run one day.
Sensors, start parts, coils, drains, and gas safety — the parts that fail most, checked before they fail.
Free — no obligation. Your calculator numbers ride along with the request.
Send Your Project to Highlands Ranch HVAC Pros
Your estimate is attached automatically. Add your info and — if you can — a few photos of the project. Photos help us price the job before we ever set foot in the house. Prefer to talk? Call (983) 900-5808.

One job, step by step
A Westridge furnace lit late for a week, then quit on a cold Sunday night. The test chain found a weak igniter in the first half hour. It was swapped, timed, and run through two full heat cycles before the tech left.
- Service performed
- Furnace Repair.
- Scope of work
- Test the full start chain, swap the failed igniter, and run two full heat cycles.
- Materials / products used
- Hot-surface igniter, flame sensor cleaning kit.
- Size
- One gas furnace, 100,000 BTU class.
- Final price
- $286.
- Cost per sq ft
- Not applicable — HVAC work is priced per job or per system, not per sq ft.
- Turnaround / duration
- Same day, about 2 hours on site.
- Payment terms / financing
- Paid in full at the visit. No deposit on repairs.
- Problem found
- Weak igniter that lit late, then not at all.
- Solution delivered
- New igniter fitted and timed. Start chain tested end to end.
- Homeowner first name
- Mark.
- Homeowner city / neighborhood
- Highlands Ranch — Westridge.
- Homeowner situation (in their own terms)
- The heat quit on a Sunday night and the house fell to 58 by morning. We have a baby, so we needed it fixed fast, not sold a new furnace.
- Outcome and homeowner reaction
- Heat was back the same day. Mark said the plain test order is what sold him: 'You showed me the part and the reading before you talked price.'
How a furnace repair runs
- 1
Call and symptom check
10 minutes
Tell us what the furnace does: no heat, short runs, cold air, or a new noise. Note any error code on the board. A gas smell or a carbon monoxide alarm means leave the house first, then call.
- 2
Tech visit and full test
45 to 60 minutes
The tech tests the start chain in order: stat call, igniter, flame sensor, gas valve, blower, and the safety switches. You hear what failed and why, in plain words.
- 3
Written price
Same visit
One price for the repair, in writing, before work starts. If the furnace is old, you also get the install price, so you can weigh both with real numbers.
- 4
The repair
1 to 3 hours
The failed part goes in. The tech then runs the furnace through two full heat cycles and checks gas pressure, which matters at 5,900 feet.
- 5
Heat check and sign-off
15 minutes
Warm air at each vent, the stat set back to your program, and the old part left with you if you want it. The bill matches the written price.
The altitude problem
Highlands Ranch sits at about 5,900 feet. Thin air is hard on furnaces that were never set up for it. Gas pressure and combustion air must be right, or you get sooty burners, lockouts on the coldest nights, and a system that works fine till the temp drops into the teens. Each repair visit checks the gas setup as well as the failed part.
Signs you may need furnace repair
- No heat, or heat that starts and quits in a few minutes
- Short runs and frequent restarts
- A blower that runs but blows cool air
- Clicking, booming, or rumbling at startup
- Error codes or a tripped limit switch
Safety comes first
A cracked heat exchanger or a combustion fault is a carbon monoxide risk. If we find a safety failure, we show you what we found and why the furnace cannot run as-is. You get the repair and swap options in writing, and the finding is logged so a second firm can check it. If your carbon alarm has sounded, leave the house and call for help first, then call us.
Repair or replace?
Igniters, flame sensors, switches, and blower motors are normal wear repairs at any age. A cracked heat exchanger on a 20-year-old furnace is a swap talk. We use the $5,000 rule — age times the repair quote — and we price both paths so the call is yours with real numbers.
Book Step One: The Site Visit
Call 983-900-5808 or send the form. Pick your window in the form. The office calls the day before your visit to confirm.
Each job is logged step by step, from first call to final walkthrough. You get the written price before work starts.
Book a Site Visit
Pick your window here, or use the picker on the home page and it lands here for you. The office calls the day before to confirm.
Related services: Furnace Installation, Air Conditioning Repair, and AC Installation and Replacement.
Also serving: HVAC Services in Littleton, HVAC Services in Centennial, and HVAC Services in Castle Rock.
Related Services
AC Installation · AC Repair · Ductless Mini-Split Installation · Emergency HVAC Repair · Furnace Installation · Heat Pump Installation and Repair · HVAC Maintenance and Tune-Ups · HVAC Replacement · Thermostat Installation & Replacement · Indoor Air Quality Services · Air Duct Cleaning · Air Duct Repair & Replacement · Whole-Home Humidifiers · Ductless Mini-Split Repair